Examples
Let's start by creating a channel with a capacity of 2 messages.
ch = Concurrent::Promises::Channel.new 2
# => #<Concurrent::Promises::Channel:0x000002 capacity taken 0 of 2>We push 3 messages, then it can be observed that the last thread pushing is sleeping since the channel is full.
threads = Array.new(3) { |i| Thread.new { ch.push message: i } }
sleep 0.01 # let the threads run
threads
# => [#<Thread:0x000003@channel.in.md:14 dead>,
# #<Thread:0x000004@channel.in.md:14 dead>,
# #<Thread:0x000005@channel.in.md:14 sleep_forever>]When message is popped the last thread continues and finishes as well.
ch.pop # => {:message=>1}
threads.map(&:join)
# => [#<Thread:0x000003@channel.in.md:14 dead>,
# #<Thread:0x000004@channel.in.md:14 dead>,
# #<Thread:0x000005@channel.in.md:14 dead>]Same principle applies to popping as well. There are now 2 messages int he channel. Lets create 3 threads trying to pop a message, one will be blocked until new messages is pushed.
threads = Array.new(3) { |i| Thread.new { ch.pop } }
sleep 0.01 # let the threads run
threads
# => [#<Thread:0x000006@channel.in.md:32 dead>,
# #<Thread:0x000007@channel.in.md:32 dead>,
# #<Thread:0x000008@channel.in.md:32 sleep_forever>]
ch.push message: 3
# => #<Concurrent::Promises::Channel:0x000002 capacity taken 0 of 2>
threads.map(&:value)
# => [{:message=>0}, {:message=>2}, {:message=>3}]Promises integration
However this channel is implemented to integrate with promises therefore all operations can be represented as futures.
ch = Concurrent::Promises::Channel.new 2
# => #<Concurrent::Promises::Channel:0x000009 capacity taken 0 of 2>
push_operations = Array.new(3) { |i| ch.push_op message: i }
# => [#<Concurrent::Promises::Future:0x00000a fulfilled with #<Concurrent::Promises::Channel:0x000009 capacity taken 2 of 2>>,
# #<Concurrent::Promises::Future:0x00000b fulfilled with #<Concurrent::Promises::Channel:0x000009 capacity taken 2 of 2>>,
# #<Concurrent::Promises::ResolvableFuture:0x00000c pending>]We do not have to sleep here letting the futures execute as Threads. Since there is capacity for 2 messages the Promises are immediately resolved without ever allocating a Thread to execute. Push and pop operations are often more efficient. The remaining pending push operation will also never require another thread, instead it will resolve when a message is popped from the channel making a space for a new message.
ch.pop_op.value! # => {:message=>0}
push_operations.map(&:value!)
# => [#<Concurrent::Promises::Channel:0x000009 capacity taken 2 of 2>,
# #<Concurrent::Promises::Channel:0x000009 capacity taken 2 of 2>,
# #<Concurrent::Promises::Channel:0x000009 capacity taken 2 of 2>]
pop_operations = Array.new(3) { |i| ch.pop_op }
# => [#<Concurrent::Promises::ResolvableFuture:0x00000d fulfilled with {:message=>1}>,
# #<Concurrent::Promises::ResolvableFuture:0x00000e fulfilled with {:message=>2}>,
# #<Concurrent::Promises::ResolvableFuture:0x00000f pending>]
ch.push message: 3 # (push|pop) can be freely mixed with (push_o|pop_op)
pop_operations.map(&:value)
# => [{:message=>1}, {:message=>2}, {:message=>3}]Selecting over channels
A selection over channels can be created with the .select_channel factory method. It
will be fulfilled with a first message available in any of the channels. It
returns a pair to be able to find out which channel had the message available.
ch1 = Concurrent::Promises::Channel.new 2
# => #<Concurrent::Promises::Channel:0x000010 capacity taken 0 of 2>
ch2 = Concurrent::Promises::Channel.new 2
# => #<Concurrent::Promises::Channel:0x000011 capacity taken 0 of 2>
ch1.push 1
# => #<Concurrent::Promises::Channel:0x000010 capacity taken 1 of 2>
ch2.push 2
# => #<Concurrent::Promises::Channel:0x000011 capacity taken 1 of 2>
Concurrent::Promises::Channel.select([ch1, ch2])
# => [#<Concurrent::Promises::Channel:0x000010 capacity taken 0 of 2>, 1]
ch1.select(ch2)
# => [#<Concurrent::Promises::Channel:0x000011 capacity taken 0 of 2>, 2]
Concurrent::Promises.future { 3 + 4 }.then_channel_push(ch1)
# => #<Concurrent::Promises::Future:0x000012 pending>
Concurrent::Promises::Channel.
# or `ch1.select_op(ch2)` would be equivalent
select_op([ch1, ch2]).
then('got number %03d from ch%d') { |(channel, value), format|
format format, value, [ch1, ch2].index(channel).succ
}.value! # => "got number 007 from ch1"try_ variants
All blocking operations (#pop, #push, #select) have non-blocking variant
with try_ prefix.
They always return immediately and indicate either success or failure.
ch
# => #<Concurrent::Promises::Channel:0x000009 capacity taken 0 of 2>
ch.try_push 1 # => true
ch.try_push 2 # => true
ch.try_push 3 # => false
ch.try_pop # => 1
ch.try_pop # => 2
ch.try_pop # => nilTimeouts
All blocking operations (#pop, #push, #select) have a timeout option.
Similar to try_ variants it will indicate success or timing out,
when the timeout option is used.
ch
# => #<Concurrent::Promises::Channel:0x000009 capacity taken 0 of 2>
ch.push 1, 0.01 # => true
ch.push 2, 0.01 # => true
ch.push 3, 0.01 # => false
ch.pop 0.01 # => 1
ch.pop 0.01 # => 2
ch.pop 0.01 # => nilBackpressure
Most importantly the channel can be used to create systems with backpressure. A self adjusting system where the producers will slow down if the consumers are not keeping up.
channel = Concurrent::Promises::Channel.new 2
# => #<Concurrent::Promises::Channel:0x000013 capacity taken 0 of 2>
log = Concurrent::Array.new # => []
producers = Array.new 2 do |i|
Thread.new(i) do |i|
4.times do |j|
log.push format "producer %d pushing %d", i, j
channel.push [i, j]
end
end
end
# => [#<Thread:0x000014@channel.in.md:133 run>,
# #<Thread:0x000015@channel.in.md:133 run>]
consumers = Array.new 4 do |i|
Thread.new(i) do |consumer|
2.times do |j|
from, = channel.pop
log.push format "consumer %d got %d. payload %d from producer %d",
consumer, j, , from
do_stuff
end
end
end
# => [#<Thread:0x000016@channel.in.md:142 run>,
# #<Thread:0x000017@channel.in.md:142 run>,
# #<Thread:0x000018@channel.in.md:142 run>,
# #<Thread:0x000019@channel.in.md:142 run>]
# wait for all to finish
producers.map(&:join)
# => [#<Thread:0x000014@channel.in.md:133 dead>,
# #<Thread:0x000015@channel.in.md:133 dead>]
consumers.map(&:join)
# => [#<Thread:0x000016@channel.in.md:142 dead>,
# #<Thread:0x000017@channel.in.md:142 dead>,
# #<Thread:0x000018@channel.in.md:142 dead>,
# #<Thread:0x000019@channel.in.md:142 dead>]
# investigate log
log
# => ["producer 0 pushing 0",
# "producer 0 pushing 1",
# "producer 0 pushing 2",
# "producer 1 pushing 0",
# "consumer 0 got 0. payload 0 from producer 0",
# "producer 0 pushing 3",
# "consumer 1 got 0. payload 1 from producer 0",
# "consumer 2 got 0. payload 2 from producer 0",
# "consumer 3 got 0. payload 0 from producer 1",
# "producer 1 pushing 1",
# "producer 1 pushing 2",
# "consumer 1 got 1. payload 3 from producer 0",
# "producer 1 pushing 3",
# "consumer 2 got 1. payload 1 from producer 1",
# "consumer 3 got 1. payload 2 from producer 1",
# "consumer 0 got 1. payload 3 from producer 1"]The producers are much faster than consumers
(since they do_stuff which takes some time)
but as it can be seen from the log they fill the channel
and then they slow down
until there is space available in the channel.
If permanent allocation of threads to the producers and consumers has to be avoided, the threads can be replaced with promises that run a thread pool.
channel = Concurrent::Promises::Channel.new 2
# => #<Concurrent::Promises::Channel:0x00001a capacity taken 0 of 2>
log = Concurrent::Array.new # => []
def produce(channel, log, producer, i)
log.push format "producer %d pushing %d", producer, i
channel.push_op([producer, i]).then do
i + 1 < 4 ? produce(channel, log, producer, i + 1) : :done
end
end # => :produce
def consume(channel, log, consumer, i)
channel.pop_op.then(consumer, i) do |(from, ), consumer, i|
log.push format "consumer %d got %d. payload %d from producer %d",
consumer, i, , from
do_stuff
i + 1 < 2 ? consume(channel, log, consumer, i + 1) : :done
end
end # => :consume
producers = Array.new 2 do |i|
Concurrent::Promises.future(channel, log, i) { |*args| produce *args, 0 }.run
end
# => [#<Concurrent::Promises::Future:0x00001b pending>,
# #<Concurrent::Promises::Future:0x00001c pending>]
consumers = Array.new 4 do |i|
Concurrent::Promises.future(channel, log, i) { |*args| consume *args, 0 }.run
end
# => [#<Concurrent::Promises::Future:0x00001d pending>,
# #<Concurrent::Promises::Future:0x00001e pending>,
# #<Concurrent::Promises::Future:0x00001f pending>,
# #<Concurrent::Promises::Future:0x000020 pending>]
# wait for all to finish
producers.map(&:value!) # => [:done, :done]
consumers.map(&:value!) # => [:done, :done, :done, :done]
# investigate log
log
# => ["producer 0 pushing 0",
# "producer 1 pushing 0",
# "producer 1 pushing 1",
# "consumer 1 got 0. payload 0 from producer 1",
# "consumer 2 got 0. payload 1 from producer 1",
# "producer 0 pushing 1",
# "producer 0 pushing 2",
# "producer 0 pushing 3",
# "producer 1 pushing 2",
# "consumer 0 got 0. payload 0 from producer 0",
# "consumer 3 got 0. payload 1 from producer 0",
# "producer 1 pushing 3",
# "consumer 2 got 1. payload 2 from producer 0",
# "consumer 1 got 1. payload 3 from producer 0",
# "consumer 3 got 1. payload 3 from producer 1",
# "consumer 0 got 1. payload 2 from producer 1"]Synchronization of workers by passing a value
If the capacity of the channel is zero then any push operation will succeed only when there is a matching pop operation which can take the message. The operations have to be paired to succeed.
channel = Concurrent::Promises::Channel.new 0
# => #<Concurrent::Promises::Channel:0x000021 capacity taken 0 of 0>
thread = Thread.new { channel.pop }; sleep 0.01
# allow the thread to go to sleep
thread
# => #<Thread:0x000022@channel.in.md:214 sleep_forever>
# succeeds because there is matching pop operation waiting in the thread
channel.try_push(:v1) # => true
# remains pending, since there is no matching operation
push = channel.push_op(:v2)
# => #<Concurrent::Promises::ResolvableFuture:0x000023 pending>
thread.value # => :v1
# the push operation resolves as a pairing pop is called
channel.pop # => :v2
push
# => #<Concurrent::Promises::ResolvableFuture:0x000023 fulfilled with #<Concurrent::Promises::Channel:0x000021 capacity taken 0 of 0>>