Class: OpenSSL::Cipher

Relationships & Source Files
Namespace Children
Classes: Cipher
Exceptions: CipherError
Extension / Inclusion / Inheritance Descendants
Subclasses: Cipher
Inherits:	Object
Defined in:	ext/openssl/ossl_cipher.c, ext/openssl/lib/openssl/cipher.rb

Overview

Provides symmetric algorithms for encryption and decryption. The algorithms that are available depend on the particular version of ::OpenSSL that is installed.

Listing all supported algorithms

A list of supported algorithms can be obtained by

puts OpenSSL::Cipher.ciphers

Instantiating a Cipher

There are several ways to create a Cipher instance. Generally, a Cipher algorithm is categorized by its name, the key length in bits and the cipher mode to be used. The most generic way to create a Cipher is the following

cipher = OpenSSL::Cipher.new('<name>-<key length>-<mode>')

That is, a string consisting of the hyphenated concatenation of the individual components name, key length and mode. Either all uppercase or all lowercase strings may be used, for example:

cipher = OpenSSL::Cipher.new('AES-128-CBC')

For each algorithm supported, there is a class defined under the Cipher class that goes by the name of the cipher, e.g. to obtain an instance of AES, you could also use

# these are equivalent
cipher = OpenSSL::Cipher::AES.new(128, :CBC)
cipher = OpenSSL::Cipher::AES.new(128, 'CBC')
cipher = OpenSSL::Cipher::AES.new('128-CBC')

Finally, due to its wide-spread use, there are also extra classes defined for the different key sizes of AES

cipher = OpenSSL::Cipher::AES128.new(:CBC)
cipher = OpenSSL::Cipher::AES192.new(:CBC)
cipher = OpenSSL::Cipher::AES256.new(:CBC)

Choosing either encryption or decryption mode

Encryption and decryption are often very similar operations for symmetric algorithms, this is reflected by not having to choose different classes for either operation, both can be done using the same class. Still, after obtaining a Cipher instance, we need to tell the instance what it is that we intend to do with it, so we need to call either

cipher.encrypt

cipher.decrypt

on the Cipher instance. This should be the first call after creating the instance, otherwise configuration that has already been set could get lost in the process.

Choosing a key

Symmetric encryption requires a key that is the same for the encrypting and for the decrypting party and after initial key establishment should be kept as private information. There are a lot of ways to create insecure keys, the most notable is to simply take a password as the key without processing the password further. A simple and secure way to create a key for a particular Cipher is

cipher = OpenSSL::AES256.new(:CFB)
cipher.encrypt
key = cipher.random_key # also sets the generated key on the Cipher

If you absolutely need to use passwords as encryption keys, you should use Password-Based Key Derivation Function 2 (PBKDF2) by generating the key with the help of the functionality provided by PKCS5.pbkdf2_hmac_sha1 or PKCS5.pbkdf2_hmac.

Although there is #pkcs5_keyivgen, its use is deprecated and it should only be used in legacy applications because it does not use the newer PKCS#5 v2 algorithms.

Choosing an IV

The cipher modes CBC, CFB, OFB and CTR all need an “initialization vector”, or short, IV. ECB mode is the only mode that does not require an IV, but there is almost no legitimate use case for this mode because of the fact that it does not sufficiently hide plaintext patterns. Therefore

You should never use ECB mode unless you are absolutely sure that you absolutely need it

Because of this, you will end up with a mode that explicitly requires an IV in any case. Although the IV can be seen as public information, i.e. it may be transmitted in public once generated, it should still stay unpredictable to prevent certain kinds of attacks. Therefore, ideally

Always create a secure random IV for every encryption of your Cipher

A new, random IV should be created for every encryption of data. Think of the IV as a nonce (number used once) - it's public but random and unpredictable. A secure random IV can be created as follows

cipher = ...
cipher.encrypt
key = cipher.random_key
iv = cipher.random_iv # also sets the generated IV on the Cipher

Although the key is generally a random value, too, it is a bad choice as an IV. There are elaborate ways how an attacker can take advantage of such an IV. As a general rule of thumb, exposing the key directly or indirectly should be avoided at all cost and exceptions only be made with good reason.

Calling #final

ECB (which should not be used) and CBC are both block-based modes. This means that unlike for the other streaming-based modes, they operate on fixed-size blocks of data, and therefore they require a “finalization” step to produce or correctly decrypt the last block of data by appropriately handling some form of padding. Therefore it is essential to add the output of #final to your encryption/decryption buffer or you will end up with decryption errors or truncated data.

Although this is not really necessary for streaming-mode ciphers, it is still recommended to apply the same pattern of adding the output of #final there as well - it also enables you to switch between modes more easily in the future.

Encrypting and decrypting some data

data = "Very, very confidential data"

cipher = OpenSSL::Cipher::AES.new(128, :CBC)
cipher.encrypt
key = cipher.random_key
iv = cipher.random_iv

encrypted = cipher.update(data) + cipher.final
#...
decipher = OpenSSL::Cipher::AES.new(128, :CBC)
decipher.decrypt
decipher.key = key
decipher.iv = iv

plain = decipher.update(encrypted) + decipher.final

puts data == plain #=> true

Authenticated Encryption and Associated Data (AEAD)

If the ::OpenSSL version used supports it, an Authenticated Encryption mode (such as GCM or CCM) should always be preferred over any unauthenticated mode. Currently, ::OpenSSL supports AE only in combination with Associated Data (AEAD) where additional associated data is included in the encryption process to compute a tag at the end of the encryption. This tag will also be used in the decryption process and by verifying its validity, the authenticity of a given ciphertext is established.

This is superior to unauthenticated modes in that it allows to detect if somebody effectively changed the ciphertext after it had been encrypted. This prevents malicious modifications of the ciphertext that could otherwise be exploited to modify ciphertexts in ways beneficial to potential attackers.

An associated data is used where there is additional information, such as headers or some metadata, that must be also authenticated but not necessarily need to be encrypted. If no associated data is needed for encryption and later decryption, the ::OpenSSL library still requires a value to be set - “” may be used in case none is available.

An example using the GCM (Galois/Counter Mode). You have 16 bytes key, 12 bytes (96 bits) nonce and the associated data auth_data. Be sure not to reuse the key and nonce pair. Reusing an nonce ruins the security guarantees of GCM mode.

cipher = OpenSSL::Cipher::AES.new(128, :GCM).encrypt
cipher.key = key
cipher.iv = nonce
cipher.auth_data = auth_data

encrypted = cipher.update(data) + cipher.final
tag = cipher.auth_tag # produces 16 bytes tag by default

Now you are the receiver. You know the key and have received nonce, auth_data, encrypted and tag through an untrusted network. Note that GCM accepts an arbitrary length tag between 1 and 16 bytes. You may additionally need to check that the received tag has the correct length, or you allow attackers to forge a valid single byte tag for the tampered ciphertext with a probability of 1/256.

raise "tag is truncated!" unless tag.bytesize == 16
decipher = OpenSSL::Cipher::AES.new(128, :GCM).decrypt
decipher.key = key
decipher.iv = nonce
decipher.auth_tag = tag
decipher.auth_data = auth_data

decrypted = decipher.update(encrypted) + decipher.final

puts data == decrypted #=> true

Class Method Summary

.new(string) ⇒ Cipher constructor

The string must be a valid cipher name like “AES-128-CBC” or “3DES”.
.ciphers ⇒ array[string...] mod_func

Returns the names of all available ciphers in an array.

Instance Attribute Summary

#auth_data=(string) ⇒ String writeonly

Sets the cipher's additional authenticated data.
#auth_tag(tag_len = 16) ⇒ String rw

Gets the authentication tag generated by Authenticated Encryption Cipher modes (GCM for example).
#auth_tag=(string) ⇒ String rw

Sets the authentication tag to verify the integrity of the ciphertext.
#auth_tag_len=(Integer) ⇒ Integer writeonly

Sets the length of the authentication tag to be generated or to be given for AEAD ciphers that requires it as in input parameter.
#authenticated? ⇒ Boolean readonly

Indicated whether this Cipher instance uses an Authenticated Encryption mode.
#iv=(string) ⇒ String writeonly

Sets the cipher IV.
#iv_len ⇒ Integer rw

Returns the expected length in bytes for an IV for this Cipher.
#iv_len=(integer) ⇒ Integer rw

Sets the IV/nonce length of the Cipher.
#key=(string) ⇒ String writeonly

Sets the cipher key.
#key_len ⇒ Integer rw

Returns the key length in bytes of the Cipher.
#key_len=(integer) ⇒ Integer rw

Sets the key length of the cipher.
#padding=(integer) ⇒ Integer writeonly

Enables or disables padding.

Instance Method Summary

#block_size ⇒ Integer

Returns the size in bytes of the blocks on which this Cipher operates on.
#decrypt ⇒ self

Initializes the Cipher for decryption.
#encrypt ⇒ self

Initializes the Cipher for encryption.
#final ⇒ String

Returns the remaining data held in the cipher object.
#initialize_copy(other)
#name ⇒ String

Returns the name of the cipher which may differ slightly from the original name provided.
#pkcs5_keyivgen(pass, salt = nil, iterations = 2048, digest = "MD5") ⇒ nil

Generates and sets the key/IV based on a password.
#random_iv ⇒ iv

Generate a random IV with Random.random_bytes and sets it to the cipher, and returns it.
#random_key ⇒ key

Generate a random key with Random.random_bytes and sets it to the cipher, and returns it.
#reset ⇒ self

Fully resets the internal state of the Cipher.
#update(data [, buffer]) ⇒ String, buffer

Encrypts data in a streaming fashion.

Constructor Details

.new(string) ⇒ `Cipher`

The string must be a valid cipher name like “AES-128-CBC” or “3DES”.

A list of cipher names is available by calling .ciphers.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 111


static VALUE
ossl_cipher_initialize(VALUE self, VALUE str)
{
    EVP_CIPHER_CTX *ctx;
    const EVP_CIPHER *cipher;
    char *name;

    name = StringValueCStr(str);
    GetCipherInit(self, ctx);
    if (ctx) {
	ossl_raise(rb_eRuntimeError, "Cipher already initialized!");
    }
    AllocCipher(self, ctx);
    if (!(cipher = EVP_get_cipherbyname(name))) {
	ossl_raise(rb_eRuntimeError, "unsupported cipher algorithm (%"PRIsVALUE")", str);
    }
    if (EVP_CipherInit_ex(ctx, cipher, NULL, NULL, NULL, -1) != 1)
	ossl_raise(eCipherError, NULL);

    return self;
}

Class Method Details

.ciphers ⇒ `array`[`string`...] (mod_func)

Returns the names of all available ciphers in an array.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 165


static VALUE
ossl_s_ciphers(VALUE self)
{
    VALUE ary;

    ary = rb_ary_new();
    OBJ_NAME_do_all_sorted(OBJ_NAME_TYPE_CIPHER_METH,
                    (void(*)(const OBJ_NAME*,void*))add_cipher_name_to_ary,
                    (void*)ary);

    return ary;
}

Instance Attribute Details

#auth_data=(string) ⇒ `String` (writeonly)

Sets the cipher's additional authenticated data. This field must be set when using AEAD cipher modes such as GCM or CCM. If no associated data shall be used, this method must still be called with a value of “”. The contents of this field should be non-sensitive data which will be added to the ciphertext to generate the authentication tag which validates the contents of the ciphertext.

The AAD must be set prior to encryption or decryption. In encryption mode, it must be set after calling #encrypt and setting #key= and #iv=. When decrypting, the authenticated data must be set after key, iv and especially after the authentication tag has been set. I.e. set it only after calling #decrypt, #key=, #iv= and #auth_tag= first.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 561


static VALUE
ossl_cipher_set_auth_data(VALUE self, VALUE data)
{
    EVP_CIPHER_CTX *ctx;
    unsigned char *in;
    long in_len, out_len;

    StringValue(data);

    in = (unsigned char *) RSTRING_PTR(data);
    in_len = RSTRING_LEN(data);

    GetCipher(self, ctx);
    if (!(EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(ctx)) & EVP_CIPH_FLAG_AEAD_CIPHER))
	ossl_raise(eCipherError, "AEAD not supported by this cipher");

    if (!ossl_cipher_update_long(ctx, NULL, &out_len, in, in_len))
        ossl_raise(eCipherError, "couldn't set additional authenticated data");

    return data;
}

#auth_tag(tag_len = 16) ⇒ `String` (rw)

Gets the authentication tag generated by Authenticated Encryption Cipher modes (GCM for example). This tag may be stored along with the ciphertext, then set on the decryption cipher to authenticate the contents of the ciphertext against changes. If the optional integer parameter tag_len is given, the returned tag will be tag_len bytes long. If the parameter is omitted, the default length of 16 bytes or the length previously set by #auth_tag_len= will be used. For maximum security, the longest possible should be chosen.

The tag may only be retrieved after calling #final.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 598


static VALUE
ossl_cipher_get_auth_tag(int argc, VALUE *argv, VALUE self)
{
    VALUE vtag_len, ret;
    EVP_CIPHER_CTX *ctx;
    int tag_len = 16;

    rb_scan_args(argc, argv, "01", &vtag_len);
    if (NIL_P(vtag_len))
	vtag_len = rb_attr_get(self, id_auth_tag_len);
    if (!NIL_P(vtag_len))
	tag_len = NUM2INT(vtag_len);

    GetCipher(self, ctx);

    if (!(EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(ctx)) & EVP_CIPH_FLAG_AEAD_CIPHER))
	ossl_raise(eCipherError, "authentication tag not supported by this cipher");

    ret = rb_str_new(NULL, tag_len);
    if (!EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_GET_TAG, tag_len, RSTRING_PTR(ret)))
	ossl_raise(eCipherError, "retrieving the authentication tag failed");

    return ret;
}

#auth_tag=(string) ⇒ `String` (rw)

Sets the authentication tag to verify the integrity of the ciphertext. This can be called only when the cipher supports AE. The tag must be set after calling #decrypt, #key= and #iv=, but before calling #final. After all decryption is performed, the tag is verified automatically in the call to #final.

For OCB mode, the tag length must be supplied with #auth_tag_len= beforehand.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 636


static VALUE
ossl_cipher_set_auth_tag(VALUE self, VALUE vtag)
{
    EVP_CIPHER_CTX *ctx;
    unsigned char *tag;
    int tag_len;

    StringValue(vtag);
    tag = (unsigned char *) RSTRING_PTR(vtag);
    tag_len = RSTRING_LENINT(vtag);

    GetCipher(self, ctx);
    if (!(EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(ctx)) & EVP_CIPH_FLAG_AEAD_CIPHER))
	ossl_raise(eCipherError, "authentication tag not supported by this cipher");

    if (!EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_TAG, tag_len, tag))
	ossl_raise(eCipherError, "unable to set AEAD tag");

    return vtag;
}

#auth_tag_len=(Integer) ⇒ Integer (writeonly)

Sets the length of the authentication tag to be generated or to be given for AEAD ciphers that requires it as in input parameter. Note that not all AEAD ciphers support this method.

In OCB mode, the length must be supplied both when encrypting and when decrypting, and must be before specifying an IV.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 668


static VALUE
ossl_cipher_set_auth_tag_len(VALUE self, VALUE vlen)
{
    int tag_len = NUM2INT(vlen);
    EVP_CIPHER_CTX *ctx;

    GetCipher(self, ctx);
    if (!(EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(ctx)) & EVP_CIPH_FLAG_AEAD_CIPHER))
	ossl_raise(eCipherError, "AEAD not supported by this cipher");

    if (!EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_TAG, tag_len, NULL))
	ossl_raise(eCipherError, "unable to set authentication tag length");

    /* for #auth_tag */
    rb_ivar_set(self, id_auth_tag_len, INT2NUM(tag_len));

    return vlen;
}

#authenticated? ⇒ `Boolean` (readonly)

Indicated whether this Cipher instance uses an Authenticated Encryption mode.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 533


static VALUE
ossl_cipher_is_authenticated(VALUE self)
{
    EVP_CIPHER_CTX *ctx;

    GetCipher(self, ctx);

    return (EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(ctx)) & EVP_CIPH_FLAG_AEAD_CIPHER) ? Qtrue : Qfalse;
}

#iv=(string) ⇒ `String` (writeonly)

Sets the cipher IV. Please note that since you should never be using ECB mode, an IV is always explicitly required and should be set prior to encryption. The IV itself can be safely transmitted in public, but it should be unpredictable to prevent certain kinds of attacks. You may use #random_iv to create a secure random IV.

Only call this method after calling #encrypt or #decrypt.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 504


static VALUE
ossl_cipher_set_iv(VALUE self, VALUE iv)
{
    EVP_CIPHER_CTX *ctx;
    int iv_len = 0;

    StringValue(iv);
    GetCipher(self, ctx);

    if (EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(ctx)) & EVP_CIPH_FLAG_AEAD_CIPHER)
	iv_len = (int)(VALUE)EVP_CIPHER_CTX_get_app_data(ctx);
    if (!iv_len)
	iv_len = EVP_CIPHER_CTX_iv_length(ctx);
    if (RSTRING_LEN(iv) != iv_len)
	ossl_raise(rb_eArgError, "iv must be %d bytes", iv_len);

    if (EVP_CipherInit_ex(ctx, NULL, NULL, NULL, (unsigned char *)RSTRING_PTR(iv), -1) != 1)
	ossl_raise(eCipherError, NULL);

    return iv;
}

#iv_len ⇒ Integer (rw)

Returns the expected length in bytes for an IV for this Cipher.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 786


static VALUE
ossl_cipher_iv_length(VALUE self)
{
    EVP_CIPHER_CTX *ctx;
    int len = 0;

    GetCipher(self, ctx);
    if (EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(ctx)) & EVP_CIPH_FLAG_AEAD_CIPHER)
	len = (int)(VALUE)EVP_CIPHER_CTX_get_app_data(ctx);
    if (!len)
	len = EVP_CIPHER_CTX_iv_length(ctx);

    return INT2NUM(len);
}

#iv_len=(integer) ⇒ Integer (rw)

Sets the IV/nonce length of the Cipher. Normally block ciphers don't allow changing the IV length, but some make use of IV for 'nonce'. You may need this for interoperability with other applications.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 695


static VALUE
ossl_cipher_set_iv_length(VALUE self, VALUE iv_length)
{
    int len = NUM2INT(iv_length);
    EVP_CIPHER_CTX *ctx;

    GetCipher(self, ctx);
    if (!(EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(ctx)) & EVP_CIPH_FLAG_AEAD_CIPHER))
	ossl_raise(eCipherError, "cipher does not support AEAD");

    if (!EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_AEAD_SET_IVLEN, len, NULL))
	ossl_raise(eCipherError, "unable to set IV length");

    /*
     * EVP_CIPHER_CTX_iv_length() returns the default length. So we need to save
     * the length somewhere. Luckily currently we aren't using app_data.
     */
    EVP_CIPHER_CTX_set_app_data(ctx, (void *)(VALUE)len);

    return iv_length;
}

#key=(string) ⇒ `String` (writeonly)

Sets the cipher key. To generate a key, you should either use a secure random byte string or, if the key is to be derived from a password, you should rely on PBKDF2 functionality provided by PKCS5. To generate a secure random-based key, #random_key may be used.

Only call this method after calling #encrypt or #decrypt.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 471


static VALUE
ossl_cipher_set_key(VALUE self, VALUE key)
{
    EVP_CIPHER_CTX *ctx;
    int key_len;

    StringValue(key);
    GetCipher(self, ctx);

    key_len = EVP_CIPHER_CTX_key_length(ctx);
    if (RSTRING_LEN(key) != key_len)
	ossl_raise(rb_eArgError, "key must be %d bytes", key_len);

    if (EVP_CipherInit_ex(ctx, NULL, NULL, (unsigned char *)RSTRING_PTR(key), NULL, -1) != 1)
	ossl_raise(eCipherError, NULL);

    rb_ivar_set(self, id_key_set, Qtrue);

    return key;
}

#key_len ⇒ Integer (rw)

Returns the key length in bytes of the Cipher.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 770


static VALUE
ossl_cipher_key_length(VALUE self)
{
    EVP_CIPHER_CTX *ctx;

    GetCipher(self, ctx);

    return INT2NUM(EVP_CIPHER_CTX_key_length(ctx));
}

#key_len=(integer) ⇒ Integer (rw)

Sets the key length of the cipher. If the cipher is a fixed length cipher then attempting to set the key length to any value other than the fixed value is an error.

Under normal circumstances you do not need to call this method (and probably shouldn't).

See EVP_CIPHER_CTX_set_key_length for further information.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 729


static VALUE
ossl_cipher_set_key_length(VALUE self, VALUE key_length)
{
    int len = NUM2INT(key_length);
    EVP_CIPHER_CTX *ctx;

    GetCipher(self, ctx);
    if (EVP_CIPHER_CTX_set_key_length(ctx, len) != 1)
        ossl_raise(eCipherError, NULL);

    return key_length;
}

#padding=(integer) ⇒ Integer (writeonly)

Enables or disables padding. By default encryption operations are padded using standard block padding and the padding is checked and removed when decrypting. If the pad parameter is zero then no padding is performed, the total amount of data encrypted or decrypted must then be a multiple of the block size or an error will occur.

See EVP_CIPHER_CTX_set_padding for further information.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 752


static VALUE
ossl_cipher_set_padding(VALUE self, VALUE padding)
{
    EVP_CIPHER_CTX *ctx;
    int pad = NUM2INT(padding);

    GetCipher(self, ctx);
    if (EVP_CIPHER_CTX_set_padding(ctx, pad) != 1)
	ossl_raise(eCipherError, NULL);
    return padding;
}

Instance Method Details

#block_size ⇒ Integer

Returns the size in bytes of the blocks on which this Cipher operates on.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 807


static VALUE
ossl_cipher_block_size(VALUE self)
{
    EVP_CIPHER_CTX *ctx;

    GetCipher(self, ctx);

    return INT2NUM(EVP_CIPHER_CTX_block_size(ctx));
}

#decrypt ⇒ `self`

Initializes the Cipher for decryption.

Make sure to call #encrypt or #decrypt before using any of the following methods:

#key=, #iv=, #random_key, #random_iv, #pkcs5_keyivgen

Internally calls EVP_CipherInit_ex(ctx, NULL, NULL, NULL, NULL, 0).

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 276


static VALUE
ossl_cipher_decrypt(int argc, VALUE *argv, VALUE self)
{
    return ossl_cipher_init(argc, argv, self, 0);
}

#encrypt ⇒ `self`

Initializes the Cipher for encryption.

Make sure to call #encrypt or #decrypt before using any of the following methods:

#key=, #iv=, #random_key, #random_iv, #pkcs5_keyivgen

Internally calls EVP_CipherInit_ex(ctx, NULL, NULL, NULL, NULL, 1).

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 258


static VALUE
ossl_cipher_encrypt(int argc, VALUE *argv, VALUE self)
{
    return ossl_cipher_init(argc, argv, self, 1);
}

#final ⇒ `String`

Returns the remaining data held in the cipher object. Further calls to #update or #final will return garbage. This call should always be made as the last call of an encryption or decryption operation, after having fed the entire plaintext or ciphertext to the Cipher instance.

If an authenticated cipher was used, a Cipher::CipherError is raised if the tag could not be authenticated successfully. Only call this method after setting the authentication tag and passing the entire contents of the ciphertext into the cipher.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 426


static VALUE
ossl_cipher_final(VALUE self)
{
    EVP_CIPHER_CTX *ctx;
    int out_len;
    VALUE str;

    GetCipher(self, ctx);
    str = rb_str_new(0, EVP_CIPHER_CTX_block_size(ctx));
    if (!EVP_CipherFinal_ex(ctx, (unsigned char *)RSTRING_PTR(str), &out_len))
	ossl_raise(eCipherError, NULL);
    assert(out_len <= RSTRING_LEN(str));
    rb_str_set_len(str, out_len);

    return str;
}

#initialize_copy(other)

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 133


static VALUE
ossl_cipher_copy(VALUE self, VALUE other)
{
    EVP_CIPHER_CTX *ctx1, *ctx2;

    rb_check_frozen(self);
    if (self == other) return self;

    GetCipherInit(self, ctx1);
    if (!ctx1) {
	AllocCipher(self, ctx1);
    }
    GetCipher(other, ctx2);
    if (EVP_CIPHER_CTX_copy(ctx1, ctx2) != 1)
	ossl_raise(eCipherError, NULL);

    return self;
}

#name ⇒ `String`

Returns the name of the cipher which may differ slightly from the original name provided.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 450


static VALUE
ossl_cipher_name(VALUE self)
{
    EVP_CIPHER_CTX *ctx;

    GetCipher(self, ctx);

    return rb_str_new2(EVP_CIPHER_name(EVP_CIPHER_CTX_cipher(ctx)));
}

#pkcs5_keyivgen(pass, salt = nil, iterations = 2048, digest = "MD5") ⇒ `nil`

Generates and sets the key/IV based on a password.

WARNING: This method is only PKCS5 v1.5 compliant when using RC2, RC4-40, or DES with MD5 or SHA1. Using anything else (like AES) will generate the key/iv using an ::OpenSSL specific method. This method is deprecated and should no longer be used. Use a PKCS5 v2 key generation method from PKCS5 instead.

Parameters

salt must be an 8 byte string if provided.
iterations is an integer with a default of 2048.
digest is a Digest object that defaults to 'MD5'

A minimum of 1000 iterations is recommended.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 302


static VALUE
ossl_cipher_pkcs5_keyivgen(int argc, VALUE *argv, VALUE self)
{
    EVP_CIPHER_CTX *ctx;
    const EVP_MD *digest;
    VALUE vpass, vsalt, viter, vdigest;
    unsigned char key[EVP_MAX_KEY_LENGTH], iv[EVP_MAX_IV_LENGTH], *salt = NULL;
    int iter;

    rb_scan_args(argc, argv, "13", &vpass, &vsalt, &viter, &vdigest);
    StringValue(vpass);
    if(!NIL_P(vsalt)){
	StringValue(vsalt);
	if(RSTRING_LEN(vsalt) != PKCS5_SALT_LEN)
	    ossl_raise(eCipherError, "salt must be an 8-octet string");
	salt = (unsigned char *)RSTRING_PTR(vsalt);
    }
    iter = NIL_P(viter) ? 2048 : NUM2INT(viter);
    if (iter <= 0)
	rb_raise(rb_eArgError, "iterations must be a positive integer");
    digest = NIL_P(vdigest) ? EVP_md5() : ossl_evp_get_digestbyname(vdigest);
    GetCipher(self, ctx);
    EVP_BytesToKey(EVP_CIPHER_CTX_cipher(ctx), digest, salt,
		   (unsigned char *)RSTRING_PTR(vpass), RSTRING_LENINT(vpass), iter, key, iv);
    if (EVP_CipherInit_ex(ctx, NULL, NULL, key, iv, -1) != 1)
	ossl_raise(eCipherError, NULL);
    OPENSSL_cleanse(key, sizeof key);
    OPENSSL_cleanse(iv, sizeof iv);

    rb_ivar_set(self, id_key_set, Qtrue);

    return Qnil;
}

#random_iv ⇒ `iv`

Generate a random IV with Random.random_bytes and sets it to the cipher, and returns it.

You must call #encrypt or #decrypt before calling this method.

[ GitHub ]

# File 'ext/openssl/lib/openssl/cipher.rb', line 55


def random_iv
  str = OpenSSL::Random.random_bytes(self.iv_len)
  self.iv = str
end

#random_key ⇒ `key`

Generate a random key with Random.random_bytes and sets it to the cipher, and returns it.

You must call #encrypt or #decrypt before calling this method.

[ GitHub ]

# File 'ext/openssl/lib/openssl/cipher.rb', line 43


def random_key
  str = OpenSSL::Random.random_bytes(self.key_len)
  self.key = str
end

#reset ⇒ `self`

Fully resets the internal state of the Cipher. By using this, the same Cipher instance may be used several times for encryption or decryption tasks.

Internally calls EVP_CipherInit_ex(ctx, NULL, NULL, NULL, NULL, -1).

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 187


static VALUE
ossl_cipher_reset(VALUE self)
{
    EVP_CIPHER_CTX *ctx;

    GetCipher(self, ctx);
    if (EVP_CipherInit_ex(ctx, NULL, NULL, NULL, NULL, -1) != 1)
	ossl_raise(eCipherError, NULL);

    return self;
}

#update(data [, buffer]) ⇒ `String`, `buffer`

Encrypts data in a streaming fashion. Hand consecutive blocks of data to the #update method in order to encrypt it. Returns the encrypted data chunk. When done, the output of #final should be additionally added to the result.

If buffer is given, the encryption/decryption result will be written to it. buffer will be resized automatically.

[ GitHub ]

# File 'ext/openssl/ossl_cipher.c', line 373


static VALUE
ossl_cipher_update(int argc, VALUE *argv, VALUE self)
{
    EVP_CIPHER_CTX *ctx;
    unsigned char *in;
    long in_len, out_len;
    VALUE data, str;

    rb_scan_args(argc, argv, "11", &data, &str);

    if (!RTEST(rb_attr_get(self, id_key_set)))
	ossl_raise(eCipherError, "key not set");

    StringValue(data);
    in = (unsigned char *)RSTRING_PTR(data);
    if ((in_len = RSTRING_LEN(data)) == 0)
        ossl_raise(rb_eArgError, "data must not be empty");
    GetCipher(self, ctx);
    out_len = in_len+EVP_CIPHER_CTX_block_size(ctx);
    if (out_len <= 0) {
	ossl_raise(rb_eRangeError,
		   "data too big to make output buffer: %ld bytes", in_len);
    }

    if (NIL_P(str)) {
        str = rb_str_new(0, out_len);
    } else {
        StringValue(str);
        rb_str_resize(str, out_len);
    }

    if (!ossl_cipher_update_long(ctx, (unsigned char *)RSTRING_PTR(str), &out_len, in, in_len))
	ossl_raise(eCipherError, NULL);
    assert(out_len < RSTRING_LEN(str));
    rb_str_set_len(str, out_len);

    return str;
}

Class: OpenSSL::Cipher

Overview

Listing all supported algorithms

Instantiating a Cipher

Choosing either encryption or decryption mode

Choosing a key

Choosing an IV

Calling #final

Encrypting and decrypting some data

Authenticated Encryption and Associated Data (AEAD)

Class Method Summary

Instance Attribute Summary

Instance Method Summary

Constructor Details

.new(string) ⇒ Cipher

Class Method Details

.ciphers ⇒ array[string...] (mod_func)

Instance Attribute Details

#auth_data=(string) ⇒ String (writeonly)

#auth_tag(tag_len = 16) ⇒ String (rw)

#auth_tag=(string) ⇒ String (rw)

#auth_tag_len=(Integer) ⇒ Integer (writeonly)

#authenticated? ⇒ Boolean (readonly)

#iv=(string) ⇒ String (writeonly)

#iv_len ⇒ Integer (rw)

#iv_len=(integer) ⇒ Integer (rw)

#key=(string) ⇒ String (writeonly)

#key_len ⇒ Integer (rw)

#key_len=(integer) ⇒ Integer (rw)

#padding=(integer) ⇒ Integer (writeonly)

Instance Method Details

#block_size ⇒ Integer

#decrypt ⇒ self

#encrypt ⇒ self

#final ⇒ String

#initialize_copy(other)

#name ⇒ String

#pkcs5_keyivgen(pass, salt = nil, iterations = 2048, digest = "MD5") ⇒ nil

Parameters

#random_iv ⇒ iv

#random_key ⇒ key

#reset ⇒ self

#update(data [, buffer]) ⇒ String, buffer

.new(string) ⇒ `Cipher`

.ciphers ⇒ `array`[`string`...] (mod_func)

#auth_data=(string) ⇒ `String` (writeonly)

#auth_tag(tag_len = 16) ⇒ `String` (rw)

#auth_tag=(string) ⇒ `String` (rw)

#authenticated? ⇒ `Boolean` (readonly)

#iv=(string) ⇒ `String` (writeonly)

#key=(string) ⇒ `String` (writeonly)

#decrypt ⇒ `self`

#encrypt ⇒ `self`

#final ⇒ `String`

#name ⇒ `String`

#pkcs5_keyivgen(pass, salt = nil, iterations = 2048, digest = "MD5") ⇒ `nil`

#random_iv ⇒ `iv`

#random_key ⇒ `key`

#reset ⇒ `self`

#update(data [, buffer]) ⇒ `String`, `buffer`