Class: Thread

When set to true, if any thread is aborted by an exception, the raised exception will be re-raised in the main thread. Returns the new state.

Thread.abort_on_exception = true
t1 = Thread.new do
  puts  "In new thread"
  raise "Exception from thread"
end
sleep(1)
puts "not reached"

This will produce:

In new thread
prog.rb:4: Exception from thread (RuntimeError)
 from prog.rb:2:in `initialize'
 from prog.rb:2:in `new'
 from prog.rb:2

See also .abort_on_exception.

There is also an instance level method to set this for a specific thread, see #abort_on_exception=.

Returns the thread debug level. Available only if compiled with THREAD_DEBUG=-1.

Sets the thread debug level. Available only if compiled with THREAD_DEBUG=-1.

Returns the status of the global “report on exception'' condition.

The default is true since Ruby 2.5.

All threads created when this flag is true will report a message on $stderr if an exception kills the thread.

Thread.new { 1.times { raise } }

will produce this output on $stderr:

#<Thread:...> terminated with exception (report_on_exception is true):
Traceback (most recent call last):
        2: from -e:1:in `block in <main>'
        1: from -e:1:in `times'

This is done to catch errors in threads early. In some cases, you might not want this output. There are multiple ways to avoid the extra output:

• If the exception is not intended, the best is to fix the cause of the exception so it does not happen anymore.

• If the exception is intended, it might be better to rescue it closer to where it is raised rather then let it kill the Thread.

• If it is guaranteed the Thread will be joined with #join or Thread#value, then it is safe to disable this report with Thread.current.report_on_exception = false when starting the Thread. However, this might handle the exception much later, or not at all if the Thread is never joined due to the parent thread being blocked, etc.

See also .report_on_exception=.

There is also an instance level method to set this for a specific thread, see #report_on_exception=.

Returns the new state. When set to true, all threads created afterwards will inherit the condition and report a message on $stderr if an exception kills a thread:

Thread.report_on_exception = true
t1 = Thread.new do
  puts  "In new thread"
  raise "Exception from thread"
end
sleep(1)
puts "In the main thread"

This will produce:

In new thread
#<Thread:...prog.rb:2> terminated with exception (report_on_exception is true):
Traceback (most recent call last):
prog.rb:4:in `block in <main>': Exception from thread (RuntimeError)
In the main thread

See also .report_on_exception.

There is also an instance level method to set this for a specific thread, see #report_on_exception=.

Wraps the block in a single, VM-global Mutex#synchronize, returning the value of the block. A thread executing inside the exclusive section will only block other threads which also use the exclusive mechanism.

Terminates the currently running thread and schedules another thread to be run.

If this thread is already marked to be killed, .exit returns the Thread.

If this is the main thread, or the last thread, exit the process.

Basically the same as .new. However, if class Thread is subclassed, then calling .start in that subclass will not invoke the subclass's #initialize method.

Changes asynchronous interrupt timing.

interrupt means asynchronous event and corresponding procedure by #raise, #kill, signal trap (not supported yet) and main thread termination (if main thread terminates, then all other thread will be killed).

The given hash has pairs like ExceptionClass => :TimingSymbol. Where the ExceptionClass is the interrupt handled by the given block. The TimingSymbol can be one of the following symbols:

:immediate

Invoke interrupts immediately.

:on_blocking

Invoke interrupts while BlockingOperation.

:never

Never invoke all interrupts.

BlockingOperation means that the operation will block the calling thread, such as read and write. On CRuby implementation, BlockingOperation is any operation executed without GVL.

Masked asynchronous interrupts are delayed until they are enabled. This method is similar to sigprocmask(3).

NOTE

Asynchronous interrupts are difficult to use.

If you need to communicate between threads, please consider to use another way such as ::Queue.

Or use them with deep understanding about this method.

Usage

In this example, we can guard from #raise exceptions.

Using the :never TimingSymbol the ::RuntimeError exception will always be ignored in the first block of the main thread. In the second .handle_interrupt block we can purposefully handle ::RuntimeError exceptions.

th = Thread.new do
  Thread.handle_interrupt(RuntimeError => :never) {
    begin
      # You can write resource allocation code safely.
      Thread.handle_interrupt(RuntimeError => :immediate) {
        # ...
      }
    ensure
      # You can write resource deallocation code safely.
    end
  }
end
Thread.pass
# ...
th.raise "stop"

While we are ignoring the ::RuntimeError exception, it's safe to write our resource allocation code. Then, the ensure block is where we can safely deallocate your resources.

Guarding from Timeout::Error

In the next example, we will guard from the Timeout::Error exception. This will help prevent from leaking resources when Timeout::Error exceptions occur during normal ensure clause. For this example we use the help of the standard library Timeout, from lib/timeout.rb

require 'timeout'
Thread.handle_interrupt(Timeout::Error => :never) {
  timeout(10){
    # Timeout::Error doesn't occur here
    Thread.handle_interrupt(Timeout::Error => :on_blocking) {
      # possible to be killed by Timeout::Error
      # while blocking operation
    }
    # Timeout::Error doesn't occur here
  }
}

In the first part of the timeout block, we can rely on Timeout::Error being ignored. Then in the Timeout::Error => :on_blocking block, any operation that will block the calling thread is susceptible to a Timeout::Error exception being raised.

Stack control settings

It's possible to stack multiple levels of .handle_interrupt blocks in order to control more than one ExceptionClass and TimingSymbol at a time.

Thread.handle_interrupt(FooError => :never) {
  Thread.handle_interrupt(BarError => :never) {
     # FooError and BarError are prohibited.
  }
}

Inheritance with ExceptionClass

All exceptions inherited from the ExceptionClass parameter will be considered.

Thread.handle_interrupt(Exception => :never) {
  # all exceptions inherited from Exception are prohibited.
}

Causes the given thread to exit, see also .exit.

count = 0
a = Thread.new { loop { count += 1 } }
sleep(0.1)       #=> 0
Thread.kill(a)   #=> #<Thread:0x401b3d30 dead>
count            #=> 93947
a.alive?         #=> false

Returns an array of Thread objects for all threads that are either runnable or stopped.

Thread.new { sleep(200) }
Thread.new { 1000000.times {|i| i*i } }
Thread.new { Thread.stop }
Thread.list.each {|t| p t}

This will produce:

#<Thread:0x401b3e84 sleep>
#<Thread:0x401b3f38 run>
#<Thread:0x401b3fb0 sleep>
#<Thread:0x401bdf4c run>

Returns the main thread.

Give the thread scheduler a hint to pass execution to another thread. A running thread may or may not switch, it depends on OS and processor.

Returns whether or not the asynchronous queue is empty.

Since .handle_interrupt can be used to defer asynchronous events, this method can be used to determine if there are any deferred events.

If you find this method returns true, then you may finish :never blocks.

For example, the following method processes deferred asynchronous events immediately.

def Thread.kick_interrupt_immediately
  Thread.handle_interrupt(Object => :immediate) {
    Thread.pass
  }
end

If error is given, then check only for error type deferred events.

Usage

th = Thread.new{
  Thread.handle_interrupt(RuntimeError => :on_blocking){
    while true
      #...
      # reach safe point to invoke interrupt
      if Thread.pending_interrupt?
        Thread.handle_interrupt(Object => :immediate){}
      end
      #...
    end
  }
}
#...
th.raise # stop thread

This example can also be written as the following, which you should use to avoid asynchronous interrupts.

flag = true
th = Thread.new{
  Thread.handle_interrupt(RuntimeError => :on_blocking){
    while true
      #...
      # reach safe point to invoke interrupt
      break if flag == false
      #...
    end
  }
}
#...
flag = false # stop thread

Alias for .fork.

Stops execution of the current thread, putting it into a “sleep'' state, and schedules execution of another thread.

a = Thread.new { print "a"; Thread.stop; print "c" }
sleep 0.1 while a.status!='sleep'
print "b"
a.run
a.join
#=> "abc"

When set to true, if this thr is aborted by an exception, the raised exception will be re-raised in the main thread.

See also #abort_on_exception.

There is also a class level method to set this for all threads, see .abort_on_exception=.

Returns true if thr is running or sleeping.

thr = Thread.new { }
thr.join                #=> #<Thread:0x401b3fb0 dead>
Thread.current.alive?   #=> true
thr.alive?              #=> false

See also #stop? and #status.

show the name of the thread.

set given name to the ruby thread. On some platform, it may set the name to pthread and/or kernel.

Returns the priority of thr. Default is inherited from the current thread which creating the new thread, or zero for the initial main thread; higher-priority thread will run more frequently than lower-priority threads (but lower-priority threads can also run).

This is just hint for Ruby thread scheduler. It may be ignored on some platform.

Thread.current.priority   #=> 0

Sets the priority of thr to integer. Higher-priority threads will run more frequently than lower-priority threads (but lower-priority threads can also run).

This is just hint for Ruby thread scheduler. It may be ignored on some platform.

count1 = count2 = 0
a = Thread.new do
      loop { count1 += 1 }
    end
a.priority = -1

b = Thread.new do
      loop { count2 += 1 }
    end
b.priority = -2
sleep 1   #=> 1
count1    #=> 622504
count2    #=> 5832

Returns the status of the thread-local “report on exception'' condition for this thr.

The default value when creating a Thread is the value of the global flag .report_on_exception.

See also #report_on_exception=.

There is also a class level method to set this for all new threads, see .report_on_exception=.

When set to true, a message is printed on $stderr if an exception kills this thr. See .report_on_exception for details.

See also #report_on_exception.

There is also a class level method to set this for all new threads, see .report_on_exception=.

Returns true if thr is dead or sleeping.

a = Thread.new { Thread.stop }
b = Thread.current
a.stop?   #=> true
b.stop?   #=> false

See also #alive? and #status.

Attribute Assignment—Sets or creates the value of a fiber-local variable, using either a symbol or a string.

See also #[].

For thread-local variables, please see #thread_variable_set and #thread_variable_get.

Adds proc as a handler for tracing.

See #set_trace_func and Kernel.set_trace_func.

Returns the current backtrace of the target thread.

Returns the execution stack for the target thread—an array containing backtrace location objects.

See ::Thread::Backtrace::Location for more information.

This method behaves similarly to Kernel.caller_locations except it applies to a specific thread.

Terminates thr and schedules another thread to be run.

If this thread is already marked to be killed, #exit returns the Thread.

If this is the main thread, or the last thread, exits the process.

Returns the ::ThreadGroup which contains the given thread, or returns nil if thr is not a member of any group.

Thread.main.group   #=> #<ThreadGroup:0x4029d914>

Alias for #to_s.

The calling thread will suspend execution and run this thr.

Does not return until thr exits or until the given limit seconds have passed.

If the time limit expires, nil will be returned, otherwise thr is returned.

Any threads not joined will be killed when the main program exits.

If thr had previously raised an exception and the .abort_on_exception or $DEBUG flags are not set, (so the exception has not yet been processed), it will be processed at this time.

a = Thread.new { print "a"; sleep(10); print "b"; print "c" }
x = Thread.new { print "x"; Thread.pass; print "y"; print "z" }
x.join # Let thread x finish, thread a will be killed on exit.
#=> "axyz"

The following example illustrates the limit parameter.

y = Thread.new { 4.times { sleep 0.1; puts 'tick... ' }}
puts "Waiting" until y.join(0.15)

This will produce:

tick...
Waiting
tick...
Waiting
tick...
tick...

Returns true if the given string (or symbol) exists as a fiber-local variable.

me = Thread.current
me[:oliver] = "a"
me.key?(:oliver)    #=> true
me.key?(:stanley)   #=> false

Returns an array of the names of the fiber-local variables (as Symbols).

thr = Thread.new do
  Thread.current[:cat] = 'meow'
  Thread.current["dog"] = 'woof'
end
thr.join   #=> #<Thread:0x401b3f10 dead>
thr.keys   #=> [:dog, :cat]

Alias for #exit.

Returns whether or not the asynchronous queue is empty for the target thread.

If error is given, then check only for error type deferred events.

See .pending_interrupt? for more information.

Raises an exception from the given thread. The caller does not have to be thr. See Kernel.raise for more information.

Thread.abort_on_exception = true
a = Thread.new { sleep(200) }
a.raise("Gotcha")

This will produce:

prog.rb:3: Gotcha (RuntimeError)
 from prog.rb:2:in `initialize'
 from prog.rb:2:in `new'
 from prog.rb:2

Wakes up thr, making it eligible for scheduling.

a = Thread.new { puts "a"; Thread.stop; puts "c" }
sleep 0.1 while a.status!='sleep'
puts "Got here"
a.run
a.join

This will produce:

a
Got here
c

See also the instance method #wakeup.

Returns the safe level in effect for thr. Setting thread-local safe levels can help when implementing sandboxes which run insecure code.

thr = Thread.new { $SAFE = 1; sleep }
Thread.current.safe_level   #=> 0
thr.safe_level              #=> 1

Establishes proc on thr as the handler for tracing, or disables tracing if the parameter is nil.

See Kernel.set_trace_func.

Returns the status of thr.

"sleep"

Returned if this thread is sleeping or waiting on I/O

"run"

When this thread is executing

"aborting"

If this thread is aborting

false

When this thread is terminated normally

nil

If terminated with an exception.

a = Thread.new { raise("die now") }
b = Thread.new { Thread.stop }
c = Thread.new { Thread.exit }
d = Thread.new { sleep }
d.kill                  #=> #<Thread:0x401b3678 aborting>
a.status                #=> nil
b.status                #=> "sleep"
c.status                #=> false
d.status                #=> "aborting"
Thread.current.status   #=> "run"

See also the instance methods #alive? and #stop?

Alias for #exit.

Returns true if the given string (or symbol) exists as a thread-local variable.

me = Thread.current
me.thread_variable_set(:oliver, "a")
me.thread_variable?(:oliver)    #=> true
me.thread_variable?(:stanley)   #=> false

Note that these are not fiber local variables. Please see #[] and #thread_variable_get for more details.

Returns the value of a thread local variable that has been set. Note that these are different than fiber local values. For fiber local values, please see #[] and #[]=.

Thread local values are carried along with threads, and do not respect fibers. For example:

Thread.new {
  Thread.current.thread_variable_set("foo", "bar") # set a thread local
  Thread.current["foo"] = "bar"                    # set a fiber local

  Fiber.new {
    Fiber.yield [
      Thread.current.thread_variable_get("foo"), # get the thread local
      Thread.current["foo"],                     # get the fiber local
    ]
  }.resume
}.join.value # => ['bar', nil]

The value “bar” is returned for the thread local, where nil is returned for the fiber local. The fiber is executed in the same thread, so the thread local values are available.

Sets a thread local with key to #value. Note that these are local to threads, and not to fibers. Please see #thread_variable_get and #[] for more information.

Returns an array of the names of the thread-local variables (as Symbols).

thr = Thread.new do
  Thread.current.thread_variable_set(:cat, 'meow')
  Thread.current.thread_variable_set("dog", 'woof')
end
thr.join               #=> #<Thread:0x401b3f10 dead>
thr.thread_variables   #=> [:dog, :cat]

Note that these are not fiber local variables. Please see #[] and #thread_variable_get for more details.

Dump the name, id, and status of thr to a string.

Waits for thr to complete, using #join, and returns its value or raises the exception which terminated the thread.

a = Thread.new { 2 + 2 }
a.value   #=> 4

b = Thread.new { raise 'something went wrong' }
b.value   #=> RuntimeError: something went wrong

Marks a given thread as eligible for scheduling, however it may still remain blocked on I/O.

Note: This does not invoke the scheduler, see #run for more information.

c = Thread.new { Thread.stop; puts "hey!" }
sleep 0.1 while c.status!='sleep'
c.wakeup
c.join
#=> "hey!"