Module: OpenSSL::Buffering

Relationships & Source Files
Extension / Inclusion / Inheritance Descendants
Included In: SSL::SSLSocket
Super Chains via Extension / Inclusion / Inheritance
Instance Chain: self, Enumerable
Defined in:	ext/openssl/lib/openssl/buffering.rb

Overview

::OpenSSL IO buffering mix-in module.

This module allows an SSL::SSLSocket to behave like an IO.

You typically won't use this module directly, you can see it implemented in SSL::SSLSocket.

Constant Summary

BLOCK_SIZE =

Default size to read from or write to the SSLSocket for buffer operations.

# File 'ext/openssl/lib/openssl/buffering.rb', line 39
```
1024*16
```

Instance Attribute Summary

#sync rw

The “sync mode” of the SSLSocket.
#eof readonly

Alias for #eof?.

Instance Method Summary

#<<(s)

Writes s to the stream.
#close

Closes the SSLSocket and flushes any unwritten data.
#each(eol = $/) (also: #each_line)

Executes the block for every line in the stream where lines are separated by eol.
#each_byte

Calls the given block once for each byte in the stream.
#each_line(eol = $/)

Alias for #each.
#eof? ⇒ Boolean (also: #eof) readonly

Returns true if the stream is at file which means there is no more data to be read.
#flush

Flushes buffered data to the SSLSocket.
#getc

Reads one character from the stream.
#gets(eol = $/, limit = nil)

Reads the next “line+ from the stream.
#initialize

Creates an instance of OpenSSL's buffering IO module.
#print(*args)

Writes args to the stream.
#printf(s, *args)

Formats and writes to the stream converting parameters under control of the format string.
#puts(*args)

Writes args to the stream along with a record separator.
#read(size = nil, buf = nil)

Reads size bytes from the stream.
#read_nonblock(maxlen, buf = nil, exception: true)

Reads at most maxlen bytes in the non-blocking manner.
#readchar

Reads a one-character string from the stream.
#readline(eol = $/)

Reads a line from the stream which is separated by eol.
#readlines(eol = $/)

Reads lines from the stream which are separated by eol.
#readpartial(maxlen, buf = nil)

Reads at most maxlen bytes from the stream.
#ungetc(c)

Pushes character c back onto the stream such that a subsequent buffered character read will return it.
#write(s)

Writes s to the stream.
#write_nonblock(s, exception: true)

Writes str in the non-blocking manner.
#consume_rbuff(size = nil) private

Consumes size bytes from the buffer.
#do_write(s) private

Writes s to the buffer.
#fill_rbuff private

Fills the buffer from the underlying SSLSocket.

Instance Attribute Details

#eof (readonly)

Alias for #eof?.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 304


alias eof eof?

#sync (rw)

The “sync mode” of the SSLSocket.

See IO#sync for full details.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 34


attr_accessor :sync

Instance Method Details

#<<(s)

Writes s to the stream. s will be converted to a String using String#to_s.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 390


def << (s)
  do_write(s)
  self
end

#close

Closes the SSLSocket and flushes any unwritten data.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 453


def close
  flush rescue nil
  sysclose
end

#consume_rbuff(size = nil) (private)

Consumes size bytes from the buffer

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 72


def consume_rbuff(size=nil)
  if @rbuffer.empty?
    nil
  else
    size = @rbuffer.size unless size
    ret = @rbuffer[0, size]
    @rbuffer[0, size] = ""
    ret
  end
end

#do_write(s) (private)

Writes s to the buffer. When the buffer is full or #sync is true the buffer is flushed to the underlying socket.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 315


def do_write(s)
  @wbuffer = "" unless defined? @wbuffer
  @wbuffer << s
  @wbuffer.force_encoding(Encoding::BINARY)
  @sync ||= false
  if @sync or @wbuffer.size > BLOCK_SIZE or idx = @wbuffer.rindex($/)
    remain = idx ? idx + $/.size : @wbuffer.length
    nwritten = 0
    while remain > 0
      str = @wbuffer[nwritten,remain]
      begin
        nwrote = syswrite(str)
      rescue Errno::EAGAIN
        retry
      end
      remain -= nwrote
      nwritten += nwrote
    end
    @wbuffer[0,nwritten] = ""
  end
end

#each(eol = $/) Also known as: #each_line

Executes the block for every line in the stream where lines are separated by eol.

#each_byte

Calls the given block once for each byte in the stream.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 269


def each_byte # :yields: byte
  while c = getc
    yield(c.ord)
  end
end

#each_line(eol = $/)

Alias for #each.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 233


alias each_line each

#eof? ⇒ `Boolean` (readonly) Also known as: #eof

Returns true if the stream is at file which means there is no more data to be read.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 300


def eof?
  fill_rbuff if !@eof && @rbuffer.empty?
  @eof && @rbuffer.empty?
end

#fill_rbuff (private)

Fills the buffer from the underlying SSLSocket

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 59


def fill_rbuff
  begin
    @rbuffer << self.sysread(BLOCK_SIZE)
  rescue Errno::EAGAIN
    retry
  rescue EOFError
    @eof = true
  end
end

#flush

Flushes buffered data to the SSLSocket.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 441


def flush
  osync = @sync
  @sync = true
  do_write ""
  return self
ensure
  @sync = osync
end

#getc

Reads one character from the stream. Returns nil if called at end of file.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 262


def getc
  read(1)
end

#gets(eol = $/, limit = nil)

Reads the next “line+ from the stream. Lines are separated by eol. If limit is provided the result will not be longer than the given number of bytes.

eol may be a String or Regexp.

Unlike IO#gets the line read will not be assigned to $_.

Unlike IO#gets the separator must be provided if a limit is provided.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 204


def gets(eol=$/, limit=nil)
  idx = @rbuffer.index(eol)
  until @eof
    break if idx
    fill_rbuff
    idx = @rbuffer.index(eol)
  end
  if eol.is_a?(Regexp)
    size = idx ? idx+$&.size : nil
  else
    size = idx ? idx+eol.size : nil
  end
  if limit and limit >= 0
    size = [size, limit].min
  end
  consume_rbuff(size)
end

#initialize

Creates an instance of OpenSSL's buffering IO module.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 44


def initialize(*)
  super
  @eof = false
  @rbuffer = ""
  @sync = @io.sync
end

#print(*args)

Writes args to the stream.

See IO#print for full details.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 420


def print(*args)
  s = ""
  args.each{ |arg| s << arg.to_s }
  do_write(s)
  nil
end

#printf(s, *args)

Formats and writes to the stream converting parameters under control of the format string.

See Kernel.sprintf for format string details.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 433


def printf(s, *args)
  do_write(s % args)
  nil
end

#puts(*args)

Writes args to the stream along with a record separator.

See IO#puts for full details.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 400


def puts(*args)
  s = ""
  if args.empty?
    s << "\n"
  end
  args.each{|arg|
    s << arg.to_s
    if $/ && /\n\z/ !~ s
      s << "\n"
    end
  }
  do_write(s)
  nil
end

#read(size = nil, buf = nil)

Reads size bytes from the stream. If buf is provided it must reference a string which will receive the data.

See IO#read for full details.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 91


def read(size=nil, buf=nil)
  if size == 0
    if buf
      buf.clear
      return buf
    else
      return ""
    end
  end
  until @eof
    break if size && size <= @rbuffer.size
    fill_rbuff
  end
  ret = consume_rbuff(size) || ""
  if buf
    buf.replace(ret)
    ret = buf
  end
  (size && ret.empty?) ? nil : ret
end

#read_nonblock(maxlen, buf = nil, exception: true)

Reads at most maxlen bytes in the non-blocking manner.

When no data can be read without blocking it raises SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.

IO::WaitReadable means SSL needs to read internally so read_nonblock should be called again when the underlying IO is readable.

IO::WaitWritable means SSL needs to write internally so read_nonblock should be called again after the underlying IO is writable.

read_nonblock needs two rescue clause as follows:

# emulates blocking read (readpartial).
begin
  result = ssl.read_nonblock(maxlen)
rescue IO::WaitReadable
  IO.select([io])
  retry
rescue IO::WaitWritable
  IO.select(nil, [io])
  retry
end

Note that one reason that read_nonblock writes to the underlying IO is when the peer requests a new TLS/SSL handshake. See openssl the FAQ for more details. www.openssl.org/support/faq.html

Raises:

(EOFError)

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 172


def read_nonblock(maxlen, buf=nil, exception: true)
  if maxlen == 0
    if buf
      buf.clear
      return buf
    else
      return ""
    end
  end
  if @rbuffer.empty?
    return sysread_nonblock(maxlen, buf, exception: exception)
  end
  ret = consume_rbuff(maxlen)
  if buf
    buf.replace(ret)
    ret = buf
  end
  raise EOFError if ret.empty?
  ret
end

#readchar

Reads a one-character string from the stream. Raises an EOFError at end of file.

Raises:

(EOFError)

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 279


def readchar
  raise EOFError if eof?
  getc
end

#readline(eol = $/)

Reads a line from the stream which is separated by eol.

Raises EOFError if at end of file.

Raises:

(EOFError)

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 253


def readline(eol=$/)
  raise EOFError if eof?
  gets(eol)
end

#readlines(eol = $/)

Reads lines from the stream which are separated by eol.

#readpartial(maxlen, buf = nil)

Reads at most maxlen bytes from the stream. If buf is provided it must reference a string which will receive the data.

See IO#readpartial for full details.

Raises:

(EOFError)

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 118


def readpartial(maxlen, buf=nil)
  if maxlen == 0
    if buf
      buf.clear
      return buf
    else
      return ""
    end
  end
  if @rbuffer.empty?
    begin
      return sysread(maxlen, buf)
    rescue Errno::EAGAIN
      retry
    end
  end
  ret = consume_rbuff(maxlen)
  if buf
    buf.replace(ret)
    ret = buf
  end
  raise EOFError if ret.empty?
  ret
end

#ungetc(c)

Pushes character c back onto the stream such that a subsequent buffered character read will return it.

Unlike IO#getc multiple bytes may be pushed back onto the stream.

Has no effect on unbuffered reads (such as #sysread).

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 292


def ungetc(c)
  @rbuffer[0,0] = c.chr
end

#write(s)

Writes s to the stream. If the argument is not a string it will be converted using String#to_s. Returns the number of bytes written.

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 343


def write(s)
  do_write(s)
  s.bytesize
end

#write_nonblock(s, exception: true)

Writes str in the non-blocking manner.

If there is buffered data, it is flushed first. This may block.

write_nonblock returns number of bytes written to the SSL connection.

When no data can be written without blocking it raises SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.

IO::WaitReadable means SSL needs to read internally so write_nonblock should be called again after the underlying IO is readable.

IO::WaitWritable means SSL needs to write internally so write_nonblock should be called again after underlying IO is writable.

So write_nonblock needs two rescue clause as follows.

# emulates blocking write.
begin
  result = ssl.write_nonblock(str)
rescue IO::WaitReadable
  IO.select([io])
  retry
rescue IO::WaitWritable
  IO.select(nil, [io])
  retry
end

Note that one reason that write_nonblock reads from the underlying IO is when the peer requests a new TLS/SSL handshake. See the openssl FAQ for more details. www.openssl.org/support/faq.html

[ GitHub ]

# File 'ext/openssl/lib/openssl/buffering.rb', line 381


def write_nonblock(s, exception: true)
  flush
  syswrite_nonblock(s, exception: exception)
end

Module: OpenSSL::Buffering

Overview

Constant Summary

Instance Attribute Summary

Instance Method Summary

Instance Attribute Details

#eof (readonly)

#sync (rw)

Instance Method Details

#<<(s)

#close

#consume_rbuff(size = nil) (private)

#do_write(s) (private)

#each(eol = $/) Also known as: #each_line

#each_byte

#each_line(eol = $/)

#eof? ⇒ Boolean (readonly) Also known as: #eof

#fill_rbuff (private)

#flush

#getc

#gets(eol = $/, limit = nil)

#initialize

#print(*args)

#printf(s, *args)

#puts(*args)

#read(size = nil, buf = nil)

#read_nonblock(maxlen, buf = nil, exception: true)

#readchar

#readline(eol = $/)

#readlines(eol = $/)

#readpartial(maxlen, buf = nil)

#ungetc(c)

#write(s)

#write_nonblock(s, exception: true)

#eof? ⇒ `Boolean` (readonly) Also known as: #eof